User manual

Chapter 4: Using the web interface
98-129217-C Setting up the interfaces 92
2. In the web interface, select SETTINGS > IP handsets.
3. If you want to change the password, click Edit next to the number you want to use.
4. Enter the password you want for your IP handset.
5. In the IP handset, enter the local number and the password you just entered in the web
interface. For the Thrane IP Handset. do as follows:
1. In the Thrane IP Handset, enter the menu system (select Menu) and select SIP to get the list
of profiles.
2. Select the BGAN profile and select Options (left softkey).
3. Select Edit/View and change the user name and password.
Note that the user name is also the local number for the handset.
If you have another IP handset, refer to the manufacturer documentation.
6. For Thrane IP Handsets: When the terminal and the handset have recognized each other, a
Configure link appears next to the handset in the list.
7. Select Configure next to a Thrane IP Handset to access the built-in web interface of the Thrane
IP Handset.
The web interface of the Thrane IP Handset opens. It is very similar to the web interface of the
terminal, but has a handset icon in the top left corner.
With the web interface of the Thrane IP Handset you can access the internal settings of the
Thrane IP Handset. For further information, refer to the user manual for the Thrane IP
Handset.
The handset remains in the list after disconnecting. When the handset is connected again, it is
automatically recognized and ready for use.
Note
The Thrane IP Handset only supports numbers (no letters)
in the password.