User`s manual

100-M0145X2 14 of 36
www.cobham.com/gms
4.3.2 Decoder Status
This screen shows the format of the incoming signal. If the decoder is not locked to incoming
signal, then UNKNOWN will be displayed
4.3.3 LAN IP ADDRS Status Display
This screen shows the LAN IP address that was established via the DHCP process with the server.
These numbers are dynamically assigned and can change if the unit is disconnected and then re-
connected to the LAN.
4.3.4 Genlock Locked
This screen displays Genlock Status. It is functional only in AVC format. Display is shown below.
 Genlock Locked: – shows if Genlock is locked.
 Mode: – shows the reference signal format.
4.3.5 Number of Programs
This screen shows number of programs in current Transport Stream. Pressing the Enter key while in
this screen will take you to Program Setup Menu.
4.3.6 Selected Program
This display shows the current selected program and then automatically cycles through PCR, Video,
Audio and PMT PID-s for the selected program. Pressing the ENTR key while in this display take you
immediately to the Program Setup menu.
4.4 Setup Menu
This menu can be accessed from the Main Display by pressing CNTR button twice. The flow chart of
MVRD Status Menu is shown in Figure 3. It consists of three submenus described below.