Product manual

100-M0131X1A 02/10/10 9 of 31
www.cobham.com/gms
Figure 2 – VETA RX GUI Main Screen
2.5 Access levels
As was mentioned previously, VETA Control Software has 2 levels of access – User and
Administrator. To have full access to the controls, it is necessary to enter password provided by
GMS into the Administrator Login window, which is located under Options pull-down menu. The
password can only be changed by the factory.
User Level Access only allows changing the predefined configuration groups.
2.6 Main Page Tab
The VETA Receiver Control Software consist of four tab indexes: Main Page, Video Settings,
Security and User Data tabs (see Figure 2). It also has three pull-down menus consisting of the
FILE, OPTIONS and HELP. Under the menus are pull down submenus and selections which are
explained in detail later in this document.
The Main Page tab consist of the RF Parameters group, the Link Status group, the Configuration
Group and a shortcut button to the BDC (block down converter) Setup parameters.
2.6.1 The RF Parameters Group
This group consists of the following fields as shown Table 1 below along with explanation of
each. Keep in mind the column labeled “R/W”. Any field marked “R” indicates this is a “read’
only (a status indicator), it cannot be changed by the user. Any field marked “R/W” or
Read/Write, indicates the value can be changed by the user.