Product manual

100-M0131X1A 02/10/10 19 of 31
www.cobham.com/gms
Figure 8 – Options
3.2.1 Special Setup
Special Setup is configured at the factory for specific application and for advanced
operations only. Consult GMS before changing any of these parameters.
This selection brings up a window with special parameters (see Figure 9). Selections are
described in Table 8.
Figure 9 – Special Setup
Field R/W Description
Input Mode
R/W
This field allows the user select between RF input and Chaining
Input.
Chaining Output
Source
R/W
The selections are Demod and Chaining In, determines the
source for chaining output.
ASI Output
R/W Allows to select ASI Output before or after Descrambling
Auto Spectrum
Detection
R/W
When On the receiver automatically detects Spectrum Polarity.
This selection is valid for Narrowband only.
AGC Meter Scale
R/W The range for this AGC scale is 0 – 10. Decimal point is allowed.