User`s manual

100-M0171X3 38 of 95
GMS Inc. doing business as Cobham Tactical Communications and Surveillance
www.cobham.com/tcs
Refer to Appendix A -for additional information on IP addressing and interfacing a personal PC to the
M2TE
Note: The M2TE transmitter supports Auto-MDIX (Medial Dependent Interface Crossover). In general
it means a crossover IP (Ethernet) cable is not needed when it is plugged into a network or a personal
PC.
IP address can be obtained in two ways:
 Front panel (please refer to 6.6.5.1).
 Serial console interface command ngc (described next).
To use serial console interface command use a terminal program such as Tera Term Pro or
HyperTerminal. Connect a serial port cable from the computer to either Serial 1 or Serial 2 cables (both
are terminated with DB9 connectors), portion of the M2TE I/O breakout cable. The M2TE serial port
communication requires the following configuration (shown in Figure 8):
Bits per second: 115200
Data bits: 8
Parity: None
Stop bits: 1
Flow control: None
ASCII Sending/Receiving format: Line Ends with Line Feeds
The login information:
Name: user
Password: user