User manual

Chapter 4: Configuration
98-143082-A To set up tracking 54
• Server port: Port number on the server. Default number is 7474.
• Client port: Port number on the EXPLORER 510. Default number is 7475.
• Encryption key: A supplied 128 bit key which must match on both the client and
server side.
5. Under APN, select the source of the APN.
• SIM default (recommended): The APN is taken from the SIM card.
• Network assigned: The APN is assigned from the network.
• User defined: APNs are provided from the Airtime Provider. Type in the APN next to
User defined name.
6. Type in the Report interval in hours (h) and minutes (m).
Example: If you type in 1 h 30 m, the EXPLORER 510 will send a report for every 1½
hour.
7. Click Save.
You can see the status of the tracking link in the status area of the web interface. If the status
area is not shown, click
 to see it.
Note
You can set up whether or not you want to allow the tracking server to control these
settings. See Remote control of tracking on page 63.