User manual

Chapter 4: Configuration
98-143082-A To set up tracking 53
To set up tracking
You can set up the EXPLORER 510 to report to a server at certain time intervals. To set up
tracking, do as follows:
1. From the Control panel
, select Tracking.
2. To enable tracking of the EXPLORER 510, select Enable tracking.
3. Select the Report type.
• Compressed. Only latitude and longitude are reported.
• Extended. Apart from latitude and longitude, heading and altitude are also included.
• ECEF. The same information as Extended, but position and speed data are 3D (ECEF
coordinates).
4. Under Server connection, type in the following details:
• Host: The IP address of the server that the EXPLORER 510 will report to.