User manual

Chapter 4: Configuration
98-143082-A Terminal settings 47
Power-up mode with external power
You can set the terminal to automatically power up when external power is applied.
1. In the Terminal settings page, locate Power-up mode when using external power.
2. Select Automatic or Manual.
Automatic means the terminal powers up automatically when external power is applied.
Manual means you must use the power switch to power the terminal.
3. Click Save.
Pointing at start-up
You can set up the EXPLORER 510 to automatically register on the BGAN network at start-up.
This is useful e.g. for semi-fixed or fixed installation, where the EXPLORER 510 is not moved
around between start-ups. See Semi-fixed installation on page 18.
1. In the Terminal settings page, locate Pointing mode at start-up.
2. Select Automatic or Manual.
If the EXPLORER 510 is moved around between each power up, select Manual from the
drop-down list. With this setting, the terminal will go through the pointing procedure
every time the terminal is powered.
If the EXPLORER 510 antenna is placed in a fixed position and the signal strength is
sufficient, select Automatic to make the EXPLORER 510 automatically register on the
satellite network when the terminal is powered.
3. Click Save.
To set up the connection mode
Startup mode (select network)
The EXPLORER 510 can use a cellular network as an alternative to the BGAN network. For
details, see Optional: To set up cellular network for data on page 64.
To set up which network you want to use when starting up the EXPLORER 510, do as follows:
1. In the Terminal settings page, locate Connection.
2. At Startup mode, select from the drop-down list which mode you want the
EXPLORER 510 to start up in. You have the following options:
BGAN (default): The EXPLORER 510 uses BGAN. If you connect an EXPLORER Cellular
Modem, you can select that instead, but BGAN will always be used at startup.
Cellular: The EXPLORER 510 only uses the cellular network, not BGAN. If an EXPLORER
Cellular Modem is not connected, or if the cellular network does not work for some
reason, you cannot access any network.