User manual

Chapter 2: To get started
98-143082-A External power 17
External power
When you connect external power to the DC input, the battery is charged while maintaining
normal operation.
Refer to Power input on page 83 for specifications and
pin-out for the DC Power input.
To power the terminal or to charge the battery, connect
one of the following external power sources to the DC
input:
•10-32 VDC
• The supplied AC/DC adapter connected to 100-
240 V Mains
• A solar panel (min. 65 W, 10-32 VDC)
Automatic power up
The default behaviour of the EXPLORER 510 is to power up automatically when you connect
external power. If you wish, you can change this power up mode, so that the EXPLORER 510 is
only powered if the Power button is pressed.
For further information on power up mode, see Power-up mode with external power on
page 47.
DC input