User manual

98-143082-A To unpack and assemble the EXPLORER 510 5

Chapter 2

To get started

This chapter describes:

• To unpack and assemble the EXPLORER 510

• To switch the EXPLORER 510 on or off

• To connect your WLAN-enabled device

• To connect to LAN

• To access the web interface

• To access the network

• To start and stop data connections

• To make phone calls over BGAN

• External power

To unpack and assemble the EXPLORER 510

Initial inspection

Inspect the shipping carton immediately upon receipt for evidence of damage during

transport. If the shipping carton is severely damaged or water stained, request that the carrier's

agent be present when opening the carton. Save the carton packing material for future use.

After unpacking the system, inspect it thoroughly for hidden damage and loose components or

fittings. If the contents are incomplete, if there is mechanical damage or defect, or if the

system does not work properly, notify your dealer.

WARNING! To avoid electric shock, do not apply

power to the system if there is any sign of shipping

damage to any part of the front or rear panel or the

outer cover. Read the safety summary at the front of this

manual before installing or operating the system.