User manual

Chapter 1: Introduction to EXPLORER 510
98-143082-A Your EXPLORER 510 terminal 4
User interfaces
The web interface is a built-in web interface for easy configuration and daily use. The web
interface is accessed from a computer, smartphone or tablet connected to the EXPLORER 510,
using an Internet browser. No installation of software is needed. For further information on the
web interface, see The web interface on page 29.
A smartphone app, EXPLORER Connect, is also available for iPhone and for Android
phones. The app includes a Satellite phone function that enables you to make calls to and
from your smartphone over the satellite network using the EXPLORER 510 terminal. It also
includes the complete feature set from the built-in web interface of the terminal, allowing you
to set up and use the terminal with your smartphone.
With AT commands you can configure and control the EXPLORER 510 from a computer
using a Telnet session. For further details see To access the terminal using AT commands on
page 23.
Antenna
The light-coloured part of the EXPLORER 510 is the antenna part comprising:
• GNSS (Global Navigation Satellite System) antenna supporting GPS, GLONASS and BeiDou.
• BGAN antenna.
• Wireless LAN antenna.
Battery
The EXPLORER 510 comes with a built-in rechargeable battery. The battery is automatically
recharged when power is applied to the EXPLORER 510. The Status indicator shows that the
battery is charging. See Light indicators on page 75.
Time between recharging depends on the use. The web interface shows estimated time left for
the battery. Recharge the battery regularly.
SIM card
The EXPLORER 510 requires a SIM card to go online. Without a SIM card you can still configure
the terminal and you may be able to make emergency calls if the network allows it, but you
cannot make normal calls nor access the internet.
SIM lock: The supplier may have locked the SIM card to a specific provider. For further
information, contact your supplier.