User`s manual

100-M0058X2 9 of 13
www.cobham.com/gms
3.1.3.5 TX VIDEO INPUT display
Available video input options are SDI (Serial Digital Interface), PAL, NTSC w/pedestal, NTSC, S-
Video NTSC, S-Video PAL, YUV NTSC and YUV PAL. Depending on which input video type is
selected the video source must be connected to the proper input connectors on the housing. See
section 4.
[Note: not all input options are shown in the pull down menu boxes unless the associated
encoder profile is loaded. For example if the SP@ML NTSC profile is loaded then only NTSC
options appear in the pull down menu boxes].
UP ↑
Toggles between SDI,PAL,NTSC with pedestal,
NTSC, S-Video NTSC, S-VIDEO PAL YUV NTSC and YUV PAL
DOWN ↓ Toggles between SDI,PAL,NTSC with pedestal,
NTSC, S-Video NTSC, S-VIDEO PAL YUV NTSC and YUV PAL
ENTR Saves new value selected
CTRL Changes to the TX AUDIO ON display
3.1.3.6 TX AUDIO ON display
This display allows user to turn audio ON or OFF.
UP ↑ Toggles between ON or OFF
DOWN ↓ Toggles between ON or OFF
ENTR Saves new value selected
CTRL Changes to the TX AUDIO LEVEL display
3.1.3.7 TX AUDIO LEVEL display
The transmitter can accept balanced audio mic or line level. This display allows user to switch
between mic or line level.
TX VIDEO INPUT
NTSC w/PEDESTAL
TX AUDIO ON