User`s manual

100-M0058X2 7 of 13
www.cobham.com/gms
UP ↑ No effect
DOWN ↓ No effect
ENTR Enters detail menu TX COFDM MODE display
CTRL Change to EXIT MDT-B CTRL display
3.1.2.3 Exit MDT-B Control Display
This display allows user to either return to the CHANNEL display of the main menu or exit control
of the MDT-B from the front LCD control panel. This is necessary when connecting to the camera
mount housing through the DB-15 connector with a PC using GMS control software.
UP ↑ No effect
DOWN ↓ No effect
ENTR Exits control of MDT-B and enters ENTER MDT-B
TRANSMITTER display
CTRL Returns to CHANNEL display
[Remember: If external PC control using GMS Control software is to be used you must first EXIT
MDT-B CTRL before attempting to connect through the DB-15 connector.]
3.1.2.4 Enter MDT-B Transmitter Display
This display allows user to re-enter the CHANNEL display of the main menu and returns control to
the front LCD control panel.
UP ↑ No effect
DOWN ↓ No effect
ENTR Enters the CHANNEL display
CTRL No effect
3.1.3 Detail Menu
The detail menu presents various displays for changing available options as explained in detailed below.
When a new value is selected the TX letters in the display window will blink indicating a change is in
process. It will stop blinking after the ENTR button is pressed (saving the new value) or exiting the display
(without saving the new value) by pressing the CTRL button.
ENTER DETAIL MENU
Enter detail
menu display
EXIT MDT-B CTRL
Exit MDT
-
B CTRL
display
ENTER MDT-B
TRANSMITTER