User manual

Chapter 4: Using the web interface
98-140012-A Advanced settings 54
Advanced settings
Fist time use
The first time you access the EXPLORER 710 you are logged in as administrator by default. You
are then guided to enable use of admin password and to type in the administrator password
you want to use.
To log in
The advanced settings normally require an administration password. To log in as administrator,
do as follows:
1. From the Control panel
, select Advanced.
If you are not logged in as administrator you are now prompted to log in.
2. Enter the Administration password.
3. Click Login.
You now have access to the advanced settings of your EXPLORER 710.
To change the administrator password
To change the administrator password, do as follows:
1. Log on as administrator
2. Under Advanced, click Change admin password.
3. Type in the Old password.
4. Type in the New password and retype it on the next line.
5. Click Save.
At the next logon the new password is required.
To log out as administrator
To log out manually, click Logout admin in the Advanced page.
To restore factory settings
To restore the factory settings of the EXPLORER 710, do as follows:
1. Under Advanced, click Restore factory defaults.
Important
All configuration will be lost and the EXPLORER 710 will return to the default
configuration.