User manual

Chapter 4: Using the web interface
98-140012-A Managing IP handsets or smartphones 50
Managing IP handsets or smartphones
Overview
This section describes how to manage smartphones and IP handsets connected to the
EXPLORER 710.
The terminal supports connection of up to 15 handsets. Each handset must have a local
number in the range 0501 to 0515 as well as a unique password. For details, see the next
section.
For details on SIP settings and how to connect your handset to the LAN or WLAN interface, see
To connect a phone using LAN or WLAN on page 27.
To manage IP handsets or smartphones in your EXPLORER 710
Do as follows:
1. Connect your smartphone to the WLAN interface or your IP handset to the LAN#1 port of
the terminal.
for details, see To connect a phone using LAN or WLAN on page 27.
2. In the web interface, select
 (Control panel) > IP handsets.
3. Locate the handset number you want to manage.
4. Click the symbol in the right side to enable or disable the handset.
•
 means the handset is disabled.
• means the handset is enabled.
5. Click in the left side to access the settings of the handset.
6. To change the Password, simply type in the new number.
Configure
Enable/disable