User manual

Chapter 4: Using the web interface
98-140012-A Configuring the Phone interface 48
Configuring the Phone interface
To enable or disable the Phone interface
1. In the Control panel , locate the Phone field.
2. Click the symbol in the right side to enable or disable the Phone interface.
means the interface is disabled.
means the interface is enabled.
To configure the Phone interface
1. In the Control panel , select Phone.
2. Set the call type for incoming calls.
You can select Standard voice or 3.1 kHz audio or both.
If you select both, any device connected to the Phone interface will react (ring) on
incoming calls.
If you select e.g. Standard voice, the Phone interface will only react on calls made to the
Standard voice phone number.
3. Set the Preferred outgoing call type.
You can select either Standard voice or 3.1 kHz audio. The selected type will be used
by default, if possible, for any outgoing call.
4. Click Save.
Configuring the ISDN interface
To enable or disable the ISDN interface
1. In the Control panel , locate the ISDN field.
2. Click the symbol in the right side to enable or disable the ISDN interface.
means the interface is disabled.
means the interface is enabled.
Note
It may take some seconds to enable the interface. When the icon changes to the
enabled icon, the interface is enabled.
Note
It may take some seconds to enable the interface. When the icon changes to the
enabled icon, the interface is enabled.