User manual

Chapter 4: Using the web interface
98-140012-A Using the Log 43
Using the Log
To access the Log
To access the Log, select  and select Log from the menu. The Log page contains:
• Call log: A list of all incoming, outgoing and missed calls since the log was last cleared.
• Data log: A list of all data sessions since the log was last cleared.
• Session log: Totals for each type of service since the log was last cleared.
Date and time is the international UTC time, received from the satellite.
Call log
The Call log shows:
• Outgoing calls shows the start time, receiving end phone number, duration and type
(Standard voice or 3.1 kHz audio).
• Received calls shows the start time, calling phone number, duration and type (Standard
voice or 3.1 kHz audio) of each incoming call.
• Missed calls shows the start time, calling phone number and type (Standard voice or
3.1 kHz audio) of each incoming call that was not received.
You can clear the Call log under Control Panel
 > Advanced > Clear logs (requires
Administrator password).
Data log
The Data log shows:
• Standard data shows bytes uploaded , bytes downloaded , date and time of each
Standard data session.
• Streaming data shows the duration and type (such as 64 kbps, 256 kbps), date and time
for each Streaming session.
You can clear the Data log under Control Panel
 > Advanced > Clear logs (requires
Administrator password).
Session log
The Session log shows:
• Call session totals shows the total duration (hh:mm:ss) for each call type since the log
was last cleared.
• Data session totals shows totals for each data connection type since the log was last
cleared. For Standard data the totals are shown as amount of data transferred (kB) and for
Streaming connections the totals are shown in duration (hh:mm:ss).
You can clear the Session log under Control Panel
 > Advanced > Clear total counters
(requires Administrator password).