User manual

Chapter 4: Using the web interface
98-140012-A Using the Dashboard 41
Using the Dashboard
The Dashboard has two main functions: To start and stop data connections and to view status.
For other functions available from the icon bars at the top and the bottom, see Icons in the
icon bars on page 38.
To start and stop data connections
To start and stop data connections on your EXPLORER 710, do as follows:
1. In the middle of the Dashboard, locate the connection profile you want to start.
2. Click
 to start the connection.
3. Click
 to stop the connection.
By default, the following connections are available:
To view status
If the window is large enough, it shows a status field at the bottom of the page. If not, hover
over

to show the status page. When you move away from the

icon, you return to the
previous page.
Note
Once a Streaming connection is started, the connection will run until you stop it.
You will be charged for the time you are connected.
Name Type of connection
Standard data Several users can share the data connection simultaneously. This
type of connection is ideal for TCP/IP traffic such as e-mail, file
transfer, and Internet and intranet access.
The user pays for the amount of data sent and received.
Streaming data
The following Streaming
classes are available:
32, 64, 128, 176 or 256
Streaming
BGAN X-Stream
Full HDR symmetric
Half HDR symmetric
Full HDR asymmetric
(64 kbps download, Full
HDR upload)
Half HDR asymmetric
(64 kbps download, Half
HDR upload)
An exclusive, high-priority connection, ensuring seamless
transfer of data. This type of connection is ideal for time critical
applications like live video over IP.
The user pays for the duration of the connection (per minute
charge).