User manual

Chapter 4: Using the web interface
98-140012-A Introduction 36
Introduction
The web interface
What is the web interface?
The web interface is built into the terminal and is used for operating, setting up and configuring
the system.
You can access the web interface from a computer, tablet or smartphone with a standard
Internet browser.
To access and navigate the web interface
To access the web interface
To access the web interface, do as follows:
1. Start up the terminal.
For details, see Starting up the EXPLORER 710 on page 15.
2. Connect your computer to the terminal.
3. Open your browser and enter ut.bgan in the address bar.
If your connected computer is set up to obtain a DNS server address automatically, this
name is translated into the local IP address of the terminal. If not, you can enter the IP
address of the terminal instead. The default IP address of the terminal is 192.168.0.1.
Note
Some parts of the web interface may not be accessible if the user permissions are
limited. For information on how to set up user permissions, see To set up user
permissions on page 56.