User manual

Chapter 3: Using the EXPLORER 710
98-140012-A Using a Computer, smartphone or tablet 26
To start or stop a data connection (LAN or WLAN)
By default, if the terminal is powered, pointed and registered on the BGAN network, a Standard
data connection is automatically established when LAN or WLAN equipment is connected.
However, you can disable automatic activation in the web interface. See User group settings
(LAN and WLAN) on page 47.
To start or stop a data connection manually using the display and keypad, do as follows:
1. Connect your equipment to the interface you want to use.
2. Start up the terminal as described in Starting up the EXPLORER 710 on page 15.
3. Use the arrow keys to highlight the connection icon in the bottom left corner of the
display.
4. Press OK to see the available connections.
5. Select the connection type you want to start or stop.
6. Press OK on the keypad.
For information on how to start and stop data connections with the web interface, see To start
and stop data connections on page 41.
Note
It may take some time to start up the connection. The display shows the status while
the connection is being established and when it has been started.