User manual

Chapter 3: Using the EXPLORER 710

98-140012-A Enabling or disabling an interface 22

To enable or disable interfaces with the web interface

To enable or disable an interface using the web interface, do as follows:

1. Connect your smartphone, tablet or computer to the EXPLORER 710, using the LAN or

WLAN interface. See:

• To connect to the LAN interface on page 25 or

• To connect to the WLAN interface on page 24.

2. To access the web interface, open your browser and type ut.bgan in the address bar, or

type the IP address of your EXPLORER 710.

(default IP address: 192.168.0.1)

For further information on the web interface, see Using the web interface on page 35

3. When the web interface opens, click

 (Control panel) from the bottom right corner of

the page.

4. Click the symbol to the right of the interface to enable or disable the interface.

•

 means the interface is disabled.

• means the interface is enabled.

1. You find the IP address in the display menu system by entering the menu and selecting

Properties > IP address.

Note

It may take some seconds to enable the interface. When the icon changes to the

enabled icon, the interface is enabled.