User manual

Chapter 2: Getting Started
98-140012-A Connecting cables 14
To connect the antenna
The antenna cable is connected at delivery.
To connect power
When you connect external power to the DC input, the battery is charged while maintaining
normal operation.
DC input
Refer to Technical specifications on page 68 for
specifications and pin-out for the DC Power input.
To power the terminal or to charge the battery, connect
one of the following external power sources to the DC
input:
•10-32 VDC
• The supplied AC/DC adapter connected to 100-
240 V Mains.
• A solar panel (min. 65 W, 10-32 VDC).
Note
If you want to use the antenna separated from
the transceiver, use a longer antenna cable and
remove the transceiver from the antenna
bracket. See the To detach the antenna on
page 9.
DC input