User manual

Chapter 2: Getting Started
98-140012-A Connecting cables 13
Connecting cables
Connectors
The connector panel is placed on the side of the EXPLORER 710 and has the following
connectors:
•1 Ext battery connector for connecting an extra EXPLORER 710 battery.
See To connect an extra external EXPLORER 710 battery on page 59.
•1 DC power input connector for 10 - 32 VDC.
See To connect power on page 14.
•1 Phone connector.
See To connect an analogue phone on page 29.
•2 LAN connectors, one with PoE.
See To connect to the LAN interface on page 25 and
To connect a phone using LAN or WLAN on page 27.
•1 ISDN connector.
See To connect an ISDN phone or modem on page 30.
Apart from the connectors in the connector panel, there is:
•1 USB (Host) connector placed next
to the Power button.
The USB (Host) connector is primarily
used for charging phones or tablets
(up to 2 A) and for recovery update of
software.
See To charge your smartphone or
tablet on page 32 and
To upload software with USB on
page 58.
•1 antenna connector for connecting the antenna module of the EXPLORER 710.
See the next section.
External battery
DC in
Phone
LAN2
ISDN
LAN1
(PoE)
USB (Host)
Antenna