Specifications

FAA Ad vi sory Cir cu lar 43.13-2A, Chap ter
3, para graphs 36 through 38 pro vides ad -
di tional guid ance for an tenna in stal la tions.
3.3. In stalling the Mount ing
Tray
Re fer to fig ures 3 -2 & 3-3
Be fore in stall ing the tray, be sure the
mount ing lo ca tion meets the re quire ments
es tab lished in ELT Mount ing Lo ca tions.
NOTE: Al though the Top Cover also has
4 holes, do not use for mount ing the
ELT.
Mark the 4 holes needed for the tray
us ing the tray as a guide. Be sure the
ar row, on the tray, aligns within 10 de
-
grees of the lon gi tu di nal axis of the air
-
craft (and in di rec tion of flight).
Also make sure there is suf fi cient room
in front of the tray to eas ily re move the
front cap (at least 5" is rec om mended).
ARTEX AIRCRAFT SUPPLIES DOCUMENT #570-5000
06/30/99 PAGE 3-10
FIG URE 3-8 RE MOTE SWITCH OUT LINE DI MEN SIONS