Specifications

Lith ium Man ga nese Di ox ide cells con-
nected in se ries. In an ef fort to in -
crease the safety of the bat tery pack,
a num ber of fea tures were de signed
into the bat tery pack. To pre vent the
cells from be ing charged, di odes are
con nected across each cell and fuses
are con nected to the out put.
1.4.4. RE MOTE CON TROL
The re mote con trol (cock pit panel
switch) pro vides “MAN UAL ON,”
“ARMED,” and “RE SET” modes. The
re mote con trol wir ing be tween the con -
trol and the ELT is de signed so that
no com bi na tion of short cir cuits be -
tween the re mote con trol, mon i tor(s),
as so ci ated wir ing and the air frame will:
• In hibit the equip ment from be ing au to -
mat i cally ac ti vated.
•
De ac ti vate the ELT af ter it has been ac
-
ti vated.
• Re sult in ad di tional power drain so that
the ELT will not meet the min i mum Peak
Ef fec tive Ra di ated Power ( PERP) of 17
dBm or Equiv a lent Iso tro pic Ra di ated
Power (EIRP) of 20 dBm through the 50
hour op er a tion pe riod at any of the
spec i fied op er at ing tem per a tures (-20°
C to +55° C).
1.5. ARTEX Dual In put An
-
tennas
All of the ARTEX 406 dual el e ment
an ten nas are de signed to work with
any of the ARTEX Dual out put 406
ELT’s in clud ing the C406-2 and
C406-2HM.
1.5.1. Rod An tenna (Dual In put)
The 110-320 Rod An tenna (re fer to
Fig ure 1-2) is in tended for lower
speed air craft that do not ex ceed 350
knots TAS.
110-320 SPEC I FI CA TIONS
•
Freq: 121.5, 243.0 & 406.025 MHz
• VSWR : 2.0:1 Max. for 121.5/243.0 MHz
1.5 Max. for 406.025 MHz
• Po lar iza tion: Ver ti cal
•
Ra di a tion Pat tern: Omnidirectional
• Air speed Rat ing: 350 Knots TAS
• Con nec tors: BNC & TNC
1.5.2. Blade An tennas (Dual In-
put)
The 110-337 Blade An tenna (re fer to
Fig ure 1-3) is the ARTEX an tenna of
choice for use on air craft that do not
ex ceed Mach 1.
110-337 SPEC I FI CA TIONS
• Freq: 121.5, 243.0 & 406.025 MHz
• VSWR: 2.0:1 Max at 121.5/243.0 MHz
1.50:1 Max for 406.025 MHz
• Po lar iza tion: Ver ti cal
•
Ra di a tion Pat tern: Omnidirectional
• Air speed Rat ing: Mach 1
•
Con nec tors: BNC & TNC
The 110-333 Blade An tenna (re fer to
Fig ure 1-4) is in tended for use on air-
craft that do not ex ceed Mach 1.
110-333 SPEC I FI CA TIONS
• Freq: 121.5, 243.0 & 406.025 MHz
•
VSWR: 1.75:1 Max for 121.5/243.0 MHz
1.50:1 Max for 406.025 MHz
ARTEX AIRCRAFT SUPPLIES DOCUMENT #570-5000
04/11/01 PAGE 1-6