User's Manual

Table Of Contents
8
2
Original OSD Mode
Original OSD mode will be enabled if the On Screen Display Page (osp)
value is set to 0 (see above).
The RF button on a receiver front panel can then be used to cycle
through the original OSD pages in the order shown below. Optional C
and D input pages will only be shown if antenna inputs C and D are
available.
The pages can also be navigated remotely by setting the On Screen
Display (osd) value (see above).
Page Order
Original Page (A) Original Page (B) Original Page (C)
optional
Original Page (D)
optional
Input(GHz) 2.50000
Input Lev A -74
Input Lev B -130
Input Lev C --
Input Lev D --
Demod Lock A---
TPS Lock OK
FEC Lock OK
Constel QPSK
Mod 1.25MHz 1/3
Pre LDPC Err 5314
Post LDPC Err 0
Packet Err 0
SNR A 22.1
SNR B --
SNR C --
SNR D --
D
| WWWWWWWW
| W W
|WWW WWW
----------------
Input(GHz) 2.50000
Input Lev A -74
Input Lev B -130
Input Lev C --
Input Lev D --
Demod Lock A---
TPS Lock OK
FEC Lock OK
Constel QPSK
Mod 1.25MHz 1/3
Pre LDPC Err 5314
Post LDPC Err 0
Packet Err 0
SNR A 22.1
SNR B --
SNR C --
SNR D --
C
| WWWWWWWW
| W W
|WWW WWW
----------------
Input(GHz) 2.50000
Input Lev A -74
Input Lev B -130
Input Lev C --
Input Lev D --
Demod Lock A---
TPS Lock OK
FEC Lock OK
Constel QPSK
Mod 1.25MHz 1/3
Pre LDPC Err 5314
Post LDPC Err 0
Packet Err 0
SNR A 22.1
SNR B --
SNR C --
SNR D --
B
| WWWWWWWW
| W W
|WWW WWW
----------------
Input(GHz) 2.50000
Input Lev A -74
Input Lev B -130
Input Lev C --
Input Lev D --
Demod Lock A---
TPS Lock OK
FEC Lock OK
Constel QPSK
Mod 1.25MHz 1/3
Pre LDPC Err 5314
Post LDPC Err 0
Packet Err 0
SNR A 22.1
SNR B --
SNR C --
SNR D --
A
| WWWWWWWW
| W W
|WWW WWW
----------------
OSD
Off