User's Manual

Table Of Contents
7
3
12 LED Indicators
SOLO2 Transmitter or SOLO4 Transmitter
LED / Button Colour Meaning / Use
Alarm LED Red When lit indicates alarm or fault condition on equipment. Usually
means no lock to incoming video.
Front Panel Lock
LED
Yellow When lit indicates service is encrypted
RF LED Green Transmitter:
When lit indicates RF output is active.
LED 1 to 8 Green Indicates which of the eight stored configurations is currently
selected.
Range Mode
LEDs
Green SOLO2 Transmitter: These LEDs have no function
SOLO4 Transmitter: Indicates range mode
Ultra Long Range: 1.25MHz QPSK FEC1/3 (optional)
Long Range: 2.5MHz QPSK FEC1/3
Medium Range: 2.5MHz QPSK FEC2/3
Short Range: 2.5MHz 16QAM FEC2/3
SOLO2 Receiver and SOLO4 Receiver
LED Condition Meaning
Red ALARM LED lit
RF LED off
No RF Signal Lock
Red ALARM LED lit
RF LED on
Has RF signal lock but no decoder lock
(stream probably encrypted with encryption
not selected at receiver)
Red ALARM LED not lit No alarms
RF LED lit RF signal lock
RF LED not lit No RF signal lock
Single CONFIG LED lit Indicates selected config
No CONFIG LEDs lit Unit Off