User's Guide

Solo7 Nano Transmitter
Commercial in
Confidence
Video, Transmitters, Solo7 Nano
Transmitter
100145
Revision: 8.0
Commercial in
Confidence
Page 7-68
No
Name
Options
Notes
1
Current Mux
Bitrate
Any valid Bitrate.
When set to 0 the mux bit rate is defined
automatically based on modulation settings.
When set manually with RF output turned
off. This overrides the automatic
calculation. In this case it can be used to
adjust the stream rate on the ASI/chaining
outputs.
2
Network Name
Cobham is the
default or you can
use any valid
name.
The Network Name applies to the whole
transport stream (TS). Inside that TS there
may be many Services each with a Service
Name.
3
Service Name
Solo-01
The default is Solo-1. This is an identifier
for the service within the transport stream
(TS).
This must match the name at the receiver
for the service to be decoded.
Inside that TS there may be many Services
each with a Service Name.
Table 7-15 – Service Options Key