User's Guide
Table Of Contents
- 0. Preface
- 1. Systems Description
- 2. Getting Started
- 2.1 Identifying your Device
- 2.2 Unpacking your Nano Transmitter
- 2.3 Unpacking your HD Nano Transmitter
- 2.4 About the Labels on your Nano Transmitter
- 2.5 Planning the Hardware Installation
- 2.6 Identifying the Variants of Nano Transmitter
- 2.7 Identifying the Options of Nano Transmitter
- 2.1 Identifying the Variants of HD Nano Transmitter
- 2.2 Identifying the Options of HD Nano Transmitter
- 2.3 About the Software with your Nano Transmitter
- 3. Controls, Connections and Indicators
- 3.1 About Controls, Connections and Indicators
- 3.2 Exploring the Top Panel – Nano Transmitter
- 3.3 Exploring the Bottom Panel – Nano Transmitter
- 3.4 Exploring the Side Panel – Nano Transmitter
- 3.5 Exploring the Top Panel – HD Nano Transmitter
- 3.6 Exploring the Bottom Panel – HD Nano Transmitter
- 3.7 Exploring the Side Panel – HD Nano Transmitter
- 4. Setting up your Nano Transmitter
- 5. Basic Operation
- 6. Advanced Operation
- 7. Advanced Setup
- 7.1 About Advanced Setup
- 7.2 Installing the Nano TX Controller on your PC
- 7.3 Connecting your PC to the Nano TX using Serial
- 7.4 Exploring the Nano TX Controller Main Window
- 7.5 Performing a Quick Setup
- 7.6 Working with the Unit Status Panel
- 7.7 Working with the Switch Panel
- 7.8 Working with the Unit Tab
- 7.9 Working with the Modulation Tab
- 7.10 Working with the Audio Tab
- 7.11 Working with the Video Tab
- 7.12 Working with the Misc Tab
- 8. Appendix A – Cautions and Warnings
- 9. Appendix B - Care and Maintenance
- 10. Appendix C-Glossary
- 11. Appendix D – Reference Material
Solo7 Nano Transmitter
Commercial in
Confidence
Video, Transmitters, Solo7 Nano
Transmitter
100145
Revision: 8.0
Commercial in
Confidence
Page 2-14
Equipment Title
Part Number
SOLO7 HD NanoTX 1.65-2.40GHz
SOL7HDNTX-165240
SOLO7 HD NanoTX 1.00-1.50GHz
SOL7HDNTX-100150
SOLO7 HD NanoTX 300-470MHz
SOL7HDNTX-030047
SOLO7 HD NanoTX 200-300MHz
SOL7HDNTX-020030
Table 2-6 – HD Nano Transmitter Variants
2.2 Identifying the Options of HD Nano Transmitter
The HD Nano Transmitter has two types of options:
Accessory Options
Licensing Options
Step 1: Identify the Accessory Options
Equipment Title
Part Number
Lemo to Dsub9 RS232 Control Cable
CA0001
NTX DC Power Cable
CA2250
NTX DC Power / FCON Cable
CA2370
NTX 9-way Breakout Cable
CA2298
NTX 7.4V Battery Pack (2250mAh)
NTXBAT
NTX Battery Charger (multi-region)
NTXBATCH
500mW booster PA, 4W power consumption
SOLAMP500mW-<freq>
Table 2-7 – Nano Transmitter Accessory Options
Step 2: Identify the Licensing Options
Equipment Title
Part Number
Enables 1.25MHz Narrowband modulation and backward
compatible MPEG-4 ASP encoder
TX-UN
Enables 625kHz Narrowband modulation (requires TX-UN)
TX-UXN