User's Manual

NETNode
Phase 1 and 2 Units
NETNode
User Manual
NETNode-V2.3
2-64
DS000034 Unclassified
4.13. Encoder Tab
If you have a NETNode which has the AVI option installed you will be able to use a
composite camera (PAL or NTSC) connected to the AV jack on the front panel of the unit.
When you are using a NETNode with a video encoder, you‟ll see an extra tab on the control
software called Encoder. This is where you configure the encoder features.
4.13.1. Encoder Preset
You can choose from a number of encoder options.
4.13.2. Video Lock
This block will show Red when there is no video lock. It shows Green when video is locked.
4.13.3. Audio Enable
Check the Audio Enable check box to turn on the audio. Audio will now take some of the
available bandwidth. For some applications you may wish to turn off audio to allow all the
bandwidth to be used by video.
4.13.4. Scrambling
It can be very important to scramble received composite assets before they are passed
across networks.
The system offers AES128 and AES 256 and this encrypts all composite assets exchanged
over the network.
This combo box enables you to select the scrambling scheme you want to use. You can
select: AES128 or AES256.