User Guide

NETNode Operations Guide
Commercial in
Confidence
IP Mesh Systems
000-130
R1.8 2015-07-24
Commercial in
Confidence
Page 3-90
Property
Range
Description
MPEG4 /H264
Encoding Mode
Low Delay Interlaced
Standard Delay
Interlaced
Low Delay Progressive
Standard Delay
Progressive
SIF
QSIF
Default is Low Delay Interlaced.
If you have selected MPEG4 mode then these
settings apply.
Video Bit rate
A number
You can type in a bit rate you wish the
encoder to use. If you set more than the
capacity of the encoder it simply won’t
operate. This item is for advanced users only.
MPEG4/H264
Frame rate
Full
1/2
1/4
1/8
1/24
If full frame rate is giving unsatisfactory
quality, you can step this down until you get
a satisfactory picture. Only applies to MPEG4.
Use when unit is operating at low bitrates.
Horizontal
Resolution
704, 528, 480 and 352
The number of pixels across each line of the
screen. Changing the horizontal resolution to
lower values will make the coded picture
softer.
Try to align horizontal resolution to the
resolution of the camera for best image
results.
Video
Sharpness
Normal
Sharp
You can increase the sharpness of the video
but you will reduce the bandwidth.