User Guide

NETNode Operations Guide
Commercial in
Confidence
IP Mesh Systems
000-130
R1.8 2015-07-24
Commercial in
Confidence
Page 3-87
Figure 3-21 The Encoder Tab
Step 2: Configure the Encoder Settings Pane (1)
This is where you configure your encoder to suit the Composite camera source you’re
operating. It also helps you to make best use of the available bandwidth on the mesh
network.
Property
Options
Notes
Encoder Preset
Low rate
(500kbps)
Medium rate
(900kbps)
High rate
(1.8Mbps)
Video Lock
Red
Green
Red means no video lock.
Green means video is locked.
Audio Enable
Checkbox
Select or Clear
Select the Audio Enable checkbox to switch on the
audio. Audio will take some of the available
bandwidth. For some applications you may wish to
turn off audio to let all the bandwidth to be used by
video.