User Guide

NETNode Operations Guide
Commercial in
Confidence
IP Mesh Systems
000-130
R1.8 2015-07-24
Commercial in
Confidence
Page 3-83
Property
Range
Description
IP Port
42391
These set an IP address and Port to and from which
the data will transferred.
The user can connect to the data port through telnet
by setting the mode to TCP and the port number to
23.
The user can connect two data ports on different
units together through setting UDP mode and using
the aligning port numbers.
Default is 42391.
IP Address
255.255.255.255
The IP address of the destination computer which
wishes to connect or all 255’s for any host.
Table 3-16 – RS232/RS485 Data Settings Pane