User Guide

NETNode Operations Guide
Commercial in
Confidence
IP Mesh Systems
000-130
R1.8 2015-07-24
Commercial in
Confidence
Page 1-2
1.3 Working with the IP Interface
When working with NETNodes you’ll be connecting with an IP interface and a web browser.
Step 1: Connect the NETNode to your Computer
1. Use the notes in Setting up your NETNode , to connect your PC to the NETNode.
Step 2: Start the Control Session
1. Power up the NETNode.
2. Click Start  Internet on the PC.
3. Your browser window will open.
4. Type the IP address of the NETNode you wish to configure like this example:
http://192.168.2.1/
5. Click the Refresh button.
6. The web browser opens the Status Overview page of the NETNode.
Figure 1-1 Starting a control session