User Guide

NETNode Operations Guide
Commercial in
Confidence
IP Mesh Systems
000-130
R1.8 2015-07-24
Commercial in
Confidence
Page 3-73
Figure 3-14 Set Clock dialogue box
Note: To set the clock automatically, set the Auto Set Time field to GPS. At this time, the
NETNode will set its internal clock based on signals from an attached GPS unit.
Step 9: Format the File System (ONLY do this if needed)
There are two flash drives built into each NETNode.
Flash
Use
Internal Flash
Holds the maps and coordinates files.
External Memory Card
Used to record video material.
1. Click the Format File System… button.
2. The Format Flash File system dialog opens.
3. Click Format Internal Flash button.
4. The Format Flash warning message is displayed.
5. Click the OK button. Your internal Flash drive will be formatted.