User Guide

NETNode Operations Guide
Commercial in
Confidence
IP Mesh Systems
000-130
R1.8 2015-07-24
Commercial in
Confidence
Page 3-71
Step 3: Interpret the Ethernet Ports Pane
Property
Range
Description
Eth 1 Mode
Transparent
LAN<->VLAN
VLAN<->LAN
LAN traffic only
VLAN traffic only
Eth1 tagged VLAN
See Working with VLAN for details.
Eth 1 Priority
0,1,2,3,4,5,6,7
Typically use 4.
Eth 1 Tag
1 - 4095
The VLAN tag on which this operates.
Eth 1 Link Status
Not Connected
10 Base-T
100 Base-T
Indicates the link status.
Table 3-9 – Ethernet Ports Pane
Step 4: Interpret the Interlink Mode Pane
Property
Range
Description
Tunnelling
Off
Master
Slave
Default is Off.
There will only be one master. See Interlink Mode
for details.
Tunnel IP
Address
IP Address
The IP Address the NETNode will use to pass
tunnelled data. This address responds to ICMP ping
for debugging purposes.
Tunnel Network
Mask
Network Mask IP
Address
Subnet Mask. Example 255.255.255.0
Tunnel Tag
0 - 4095
The tag used for the VLAN tunnel operation.
If set to zero the LAN is used.
Tunnel Priority
0,1,2,3,4,5,6,7
Typically use 4.
Table 3-10 – Interlink Mode Pane