User Guide

NETNode Operations Guide
Commercial in
Confidence
IP Mesh Systems
000-130
R1.8 2015-07-24
Commercial in
Confidence
Page 3-57
 Spectra
 Maps
Step 1: Open the Overview Sub-Tab
1. Click Status  Overview.
2. The Status tab opens focussed on the Overview sub-tab.
Figure 3-7 The Status / Overview Tab
Step 2: Interpret the Basic Details
No
Property
Range
Description
1
Node ID
0 to 7 or
0 to 11 or
0 to 15 depending on
operating mode.
We are showing two NETNodes with
Node IDs of 1 and 2. There could be up
to sixteen NETNodes in a mesh with
Node IDs numbered 0 to 15.
The Node ID can be shown in different
colours when a NETNode experiences
traffic congestion.
2
Unit Name
You can use up to 12
alphanumeric
characters for the Unit
name.
The unit name is a friendly name to make
it easier for you to know which NETNode
we are talking about. This name is
assigned in the Global Settings Tab.
3
IP Address
192.168.9.99 for
example.
This shows the IP address of the unit
that we set up in our initial configuration.
Notice that it is shown as a hyperlink. If
you click on one of these hyperlinks the
browser will switch to that NETNode.