User Guide

NETNode Operations Guide
Commercial in
Confidence
IP Mesh Systems
000-130
R1.8 2015-07-24
Commercial in
Confidence
Page 3-52
Step 3: Start the Control Pages
1. Power up the NETNode.
2. Click Start  Internet on the PC.
3. Your browser window will open.
4. Type the IP address of the NETNode you wish to configure like this example:
http://192.168.0.1/
5. Click the Refresh button.
6. The web browser opens the Status Overview page of the NETNode.
Figure 3-2 Starting the Control Session
Step 4: Log on to the Control Pages
7. The Authentication Required dialog opens
8. By default, the User Name is not required
9. By default the password is meshweb.
10. Click Log In button.