User Guide

NETNode Operations Guide
Commercial in
Confidence
IP Mesh Systems
000-130
R1.8 2015-07-24
Commercial in
Confidence
Page 2-33
Figure 2-11 Setting up recording
The data is recorded onto the SD card in 30 second chunks. Thus the dimension of each
chunk is the encoded bit-rate (in bits/s) * 30 / 8. Set the maximum number of chunks to be
less than the capacity of the card over the chunk size, to prevent the data from exceeding
SD card capacity.
Step 5: Check Recording is Taking Place
1. Connect your PC to the NETNode and login.
2. Navigate to the Information tab.
3. Click File System.
4. The File System window opens.
5. Click Flash Card.
6. The Directory window opens.
7. Click Stream.
8. The file window opens with all your recordings.