User Guide

NETNode Operations Guide
Commercial in
Confidence
IP Mesh Systems
000-130
R1.8 2015-07-24
Commercial in
Confidence
Page 2-16
2.2 Configuring your NETNode with Node Finder
Step 1: Setup the Serial Connection between NETNode and PC
Connect your NETNode to your computer with the control cable. See Configuring your
NETNode for the very first time earlier in this section.
Step 2: Start Node Finder
1. Double-click the Node Finder icon on the computer desktop.
2. The Node Finder application opens.
3. Click Tools Network Settings (via serial port)…
4. The Select Serial Port dialog opens.
5. Select the Serial port for your NETNode.
6. Click Next> button.
7. The Configure Network dialog opens.
8. Set up the network.
9. Click Apply button.
10. Click Finish button.
Figure 2-2 Using Node Finder