User Guide

NETNode Operations Guide
Commercial in
Confidence
IP Mesh Systems
000-130
R1.8 2015-07-24
Commercial in
Confidence
Page 1-10
Serial
Part
Description
5
Ethernet
You’ll connect the PC to one of the two Ethernet ports
available on the NETNode.
6
PC
Has Cobham Stream player software or VLC software
loaded and configured.
Table 1-3 – Sending composite video across Mesh network
Step 3: Configure the NETNode with the AVI Option Fitted
1. Connect your PC to the NETNode and log on.
2. Navigate to the Encoder tab.
3. Check that the Video Lock indicator is showing green.
4. Set the Encoder Preset drop-down box to Medium rate (900kbps).
5. Set the Audio Enable checkbox to Checked if you have an audio source connected.
6. Set the Scrambling drop-down box to off.
7. Click Apply button.
8. The Encoder Configured Successfully dialog opens.
9. Click OK button.
Figure 1-8 Encoder configuration
10. Navigate to the Global Settings tab.
11. In the Main pane, set Streaming Protocol to UDP Multicast.