User Guide

NETNode Operations Guide
Commercial in
Confidence
IP Mesh Systems
000-130
R1.8 2015-07-24
Commercial in
Confidence
Page 1-6
Step 3: Rig the Camera across the Mesh
It will be necessary to have two or more fully configured NETNodes, A configured Panasonic
BB-HCM735 Network Camera and a PC with the Panasonic software loaded and configured.
Figure 1-5 Sending IP video across Mesh
Serial
Part
Description
1
Panasonic BB-
HCM735 Camera
Head
Has integrated camera, microphone and PTZ systems.
2
Ethernet
You’ll connect the camera to one of the two Ethernet
ports available on the NETNode.
3
First NETNode
Located near the target.
4
Second NETNode
Located at the safe location.
5
Ethernet
You’ll connect the PC to one of the two Ethernet ports
available on the NETNode.
6
PC
The PC has Panasonic software pre-configured to
monitor the output of the camera.
Table 1-2 – Sending IP video over Mesh