User Guide

NETNode Operations Guide
Commercial in
Confidence
IP Mesh Systems
000-130
R1.8 2015-07-24
Commercial in
Confidence
Page 1-4
Step 1: Rig the Camera
Figure 1-3 Rigging an IP Camera
Serial
Part
Description
1
Panasonic AC
Adaptor, BB-HCA3
Converts 100-240VAC 50-60Hz to 12VDC 0.75A for the
camera head.
2
Panasonic BB-
HCM735 Camera
Head
Has integrated camera, microphone and PTZ systems.
3
Ethernet Cable
The cable is used for the initial configuration. This will
be replaced by the mesh network after setup.
4
Personal Computer
Needs to support video from the camera.
5
Panasonic Network
Camera Software
The CD contains configuration setup and Network
camera viewer software.
Table 1-1 – Rigging an IP Camera