User Guide
NETNode Operations Guide
Commercial in
Confidence
IP Mesh Systems
000-130
R1.8 2015-07-24
Commercial in
Confidence
Page 3-94
Figure 3-24 Enabling TFTP
Step 2: Prepare for the Upgrade
1. Establish the IP address of the NETNode you wish to upgrade.
2. Place the latest version of the firmware in the root of you C: drive.
Step 3: Perform the Upgrade
1. On the PC click StartRun.
2. The Run dialogue box opens.
3. Type cmd and click the OK button (depending on the Operating System of your PC, this
can also be done clicking the Start button and enter cmd in the
Search programs and
files
box).
4. The Command Prompt window opens.
5. Type ping <
IP address
> -t and press enter (insert the IP address of the unit you wish
to upgrade.
6. You’ll see the NETNode being continuously pinged which confirms you are connected and
that you are OK to proceed. Leave it pinging!
7. Open a second command prompt and type cd.. and press enter.
8. This will change directory to the root of C: (where you placed the upgrade file earlier).
9. At the command prompt, type tftp <
IP address
> put d840_mesh_download.exo
(insert the IP address of the unit you wish to upgrade) and press enter.