User's Manual

Monitor Installation
The Monitor installation procedure described in the following steps was captured during the installation of the M700
system in a Ford Crown Victoria. Different installation procedures will need to be followed for installation of the M700
system on other types of vehicles. For more information please contact COBAN Technologies for more details on
your specific vehicle type and orientation.
CAUTION: COBAN Technologies will not assume any responsibility or liability in the event that any type of damage
is caused to the windshield by a third party installer during the installation process.
Note:
1. The Department will need to use its existing
Laptop / MDC Mounts, or procure an
additional Pedestal Mount to support
COBAN’s Monitor and Keyboard mounts.
2. Department may choose to mount the
Monitor/Keyboard assembly on the
existing Laptop/MDC Mounts already in
the Vehicle
3. Department may choose to mount the
Monitor/Keyboard assembly on a
Pedestal/MDC Mount procured through,
or designed by, COBAN
NOTE:
COBAN does NOT supply any Hardware or
Mounting Components below the VMDT Monitor
and Keyboard Mounts. The Department will need
to use its existing Laptop/MDC mounts, or
procure an additional MDC/Pedestal Mount to
support COBANs’ Monitor and Keyboard
Mounts.