User's Manual

Approach the BWC NFC tag to the sensing area of the NFC reader on In-Car
Trigger fixture like section 7.2. The buzzer on fixture would generate 3 short beeps
to notify programming complete.
7.3.2 User Data programming
In BWC Ctrl window, click the NFC Tag User Data Prog., fill max 32 characters in
User Data column, and click “Set” button. Wait for the radio button indicator NFC
User Data Prog. EN being set itself to switch the NFC reader to programming
mode.
Approach the BWC NFC tag to the sensing area of the NFC reader on In-Car
Trigger fixture like section 7.2. The buzzer on fixture would generate 3 short beeps
to notify programming complete.