User's Manual

Revision History
Data
Description
2016/10/12
 Add chapter 11 to descript firmware flushing process with firmware
flushing fixture.
2016/12/06
 Chapter 2. Add this chapter to highlight the version requirement on
SW, FW, and HW for this demo guide.
 Section 7.3. Update the procedure description on programming the
BWC BT MAC address into NFC tag.
 Section 8.2.1. Add this section to descript BWC service discovery
procedure and the connection bonding between BWC and In-Car
Trigger.
 Section 8.2.4. Add this section to implement a simple Bluetooth
sniffer with smartphone make diagnose to the Bluetooth connection
problem between In-Car Trigger and BWC.
2016/12/28
 Chapter 7.1. Update the data context and format programmed in the
NFC tag.
 Chapter 7.3. Update the procedure description on programming the
BWC Bluetooth Mac address and User defined data into NFC tag.
2017/01/11
 Chapter 5, Update appearance of Test UI program.
 Section 6.2, Update all digital output function definition based on V2
In-Car Trigger
 Chapter 10, Update push button function definition based on V2 In-
Car Trigger.
 Chapter 11, Update LEDs indicators behavior based on V2 In-Car
Trigger.
 Chapter 12, Update context definition of registers table.
 Chapter 13, Update firmware flushing process with serial bootloader
application.