Manual

3 9062 Function Submenu List and Descriptions
3-12 9062 PRODUCT MANUAL 9062-OM (V4.6)
Provides video format up/down/cross-conversions and
aspect ratio controls.
Note: Scaling and/or format conversion removes Dolby
®
metadata and ATC packets (if present). If Dolby
®
metadata is present
and needs to be preserved, use the Dolby Metadata function tab to preserve and re-apply the metadata on the output
SDI. Refer to Dolby Metadata function on page 3-35 for more information.
• Scaler enable Enables or bypasses Scaler function as follows:
• Enabled: Provides Scaler functions for the received video input.
• Bypassed: Received video input bypasses the Scaler functions.
Scaler
• Current Input Format Displays the input format of the video currently being received by the 9062
(for example, 1080p at 29.97 Hz frame rate as shown here).
Note: Rates displayed for progressive formats are frame rates; rates
displayed for interlaced formats are field rates.
Current Input Format
• Current Output Format Displays the currently selected output format of the video currently being
processed by the 9062 (for example, 1080p HD at 29.97 Hz frame rate as
shown here). The output format displayed is the output present on the
card’s SDI OUT BNC connectors.
Current Output Format
Note: Output format shown in this display tracks with selection made in
or drop-down lists. Output Format
display only tracks with changes applicable to the currently
received input format (for example, when currently receiving HD
video, changes made in the drop-down list have no
effect on the Output Format display). Output format also tracks
with any applicable Scaler functions that affect output format.
Note: Rates displayed for progressive formats are frame rates; rates
displayed for interlaced formats are field rates.
Table 3-2 9062 Function Submenu List — continued