Manual

9062-OM (V4.6) 9062 PRODUCT MANUAL 1-19
Introduction Technical Specifications
Technical Specifications
Table 1-3 lists the technical specifications for the 9062 Up/Down/Cross
Format Converter, Video/Audio In with Frame Sync card.
Table 1-3 Technical Specifications
Item Characteristic
Part number, nomenclature 9062 Up/Down/Cross Format Converter with HD/SD-SDI Input,
Embedded Audio Support and Frame Sync
Installation/usage environment Intended for installation and usage in frame meeting openGear™
modular system definition.
Power consumption < 24 Watts maximum
Environmental:
Operating temperature:
Relative humidity (operating or storage):
32° – 104° F (0° – 40° C)
< 95%, non-condensing
Frame communication 10/100 Mbps Ethernet with Auto-MDIX.
Indicators Card edge display and indicators as follows:
• 4-character alphanumeric display
• Status/Error LED indicator
• Input Format LED indicator
Controls Card edge switches as follows:
• Menu Enter pushbutton switch
• Menu exit pushbutton switch
• Up/down selection toggle switch
Internal Tone Generators Four built-in tone generators, each configurable for 18 discrete
sine wave frequencies ranging from 50 Hz to 16 kHz.
Generator source signal level is equivalent to -20 dBu.
Serial Digital Video Input Data Rates Supported:
SMPTE 292 HD-SDI: 1.485 Gbps or 1.485/1.001 Gbps
SMPTE 259M-C SD-SDI: 270 Mbps
Impedance:
75 Ω terminating
Equalization (HD):
328 ft (100 m) Belden 1694A
Equalization (SD):
1000 ft (305 m) Belden 1694A
Return Loss:
> 15 dB at 5 MHz – 1.485 GHz
Post-Processor Serial Digital Video
Outputs
Number of Outputs:
Four HD/SD-SDI BNC per IEC 60169-8 Amendment 2
Impedance:
75 Ω