User guide

9035-OM (V4.4) 9035 PRODUCT MANUAL 3-25
Operating Instructions 9035 Function Submenu List and Descriptions
Embedded Audio Group 3/4
This function selects the audio source for each embedded
audio channel 9 thru 16 (Embedded Audio Groups 3 and 4).
It also provides Gain and Phase Invert controls for each
channel.
Table 3-2 9035 Function Submenu List — continued
Embed Ch 4
Embedded
Audio Group 3
AES I/O (1-4)
AES IN (5-8)
AN-AUD
IN (1-8)
6 dB
6 dB
10 dB
10 dB
–20 dB
–15 dB
0 dB
+
+
+
+
–
+
+
Silence
Embedded SDI
Channels 1 – 16
Embed Ch 8
AES Ch 1
AES Ch 2
AES Ch 14
CH9
CH10
CH11
CH12
CH13
CH14
CH15
CH16
Embedded
Audio Group 4
Analog Ch 1
Embed Ch 15
The example above shows
various Source selections and
individual audio control settings
for various audio sources fed to
the Destination channels
Embedded Ch 9 thru
Embedded Ch 16 in Embedded
Audio Groups 3 and 4, with the
resulting setup (right).
The source-to-destination
correlation shown here is only
an example; any of the sources
on the left can connect to any of
the destinations on the right, or
to Embedded Audio Groups 1
and 2 (not shown here).
Additional sources not shown
here are also available. These
are described on the following
pages.